The CT Gage has been designed as a multi- purpose ultrasonic material and coating thickness instrument with a wide range of features. The CT-Gage is able to simultaneously and independently measure the material and the coating thickness, or switch to the time based B-Scan view to see a cross section view of the material you are inspecting. There are 5 Measurement Modes:  | Pulse-Echo | | Pulse-Echo w/Coating | | Echo-Echo | | Pulse Echo w/Temperature Compensation | | Coating only mode |
The CT-Gage is easy to use incorporating: | Single or two-point calibration option for material and coating, or selection from basic material types. | | Automatic Probe Zero | | Automatic Probe Recognition | | Automatic temperature compensation | | Automatic Gain Control | | Time Corrected Gain |
A custom calibration configuration for both the material and coating types offers extreme linearity. The CT-Gage DL includes all of the above features but is also equipped with a data logger. The data logger consists of two file formats: Sequential logging with auto identifiers and an alpha-numeric grid. The file formats are currently compatible with Ultra Pipe Asset Management Software. The CT-Gage DL can store 16,000+ readings, with B-Scan captures, recording all the gauge’s settings and features, or turn the graphics mode off and store over 210,000 readings! | 5 Measurement Modes | | Pulse-Echo | | Pulse-Echo w/Coating | | Echo-Echo | | Pulse Echo w/Temperature Compensation | | Coating Only Mode |
The CT-Gage DL+ enables A-Scan measurements to be taken and stored. This
model also includes Time Corrected Gain features. | 
